SENTINEL 3 61
13.2.7 OPTION
1. Press the menu button twice to display the OPTION menu.
2. In this menu you can adjust Language, Calendar, and Auto Change Source
3. To change the language, select it and use the volume keys to scroll through the
available languages.
4. To view the calendar, select it and press the volume up button. To scroll through
the months, use the volume up and down buttons. To scroll between years, use
the channel up and down buttons. Press menu to exit calendar mode.
5. The auto change source option provides the same functionality as pressing the
AUTO button. Select it, and use the volume buttons to change the interval time.
13.2.8 CLOCK
1. Press the menu button three times to display the CLOCK menu.
2. In this menu you can adjust the Time, On-Time, Off-Time, and Attention
mode time
3. To adjust the time, select it and press the volume down button to adjust the hour.
Press the volume up button to adjust the minute. You must set the time before you
can adjust the other settings in this menu.
4. To adjust the on-time (the time you want the monitor to turn on), select it and press
the volume down button to adjust the hour. Press the volume up button to adjust
the minute.
5. To adjust the off-time (the time you want the monitor to turn off), select it and press
the volume down button to adjust the hour. Press the volume up button to adjust
the minute.
6. The attention mode time allows you to set up a ashing “ATTENTION” message
that will notify you in advance before the monitor turns off. You must have the off-
time set to use this function. Set the attention mode time a few minutes before the
off-time. To set it up, select it and press the volume down button to adjust the hour.
Press the volume up button to adjust the minute.
13.2.9 SYSTEM
1. Press the menu button four times to display the SYSTEM menu.
2. In this menu you can adjust Color System, Blue Backlight Option, Horizontal Flip,
and Vertical Flip
3. The color system is defaulted to AUTO (recommended). To change the color
system to NTSC or PAL, select it use the volume buttons.
4. The blue backlight option is defaulted to ON. To turn it off and display a black
background instead, select it and press the volume up button.
5. To change the horizontal ip, select it and press volume up. This can also be
changed directly using the remote.
6. To change the vertical ip, select it and press volume down. This can also be
changed directly using the remote.
To Next Page
Loading...
Need help?
General
