Dell EMC PowerSwitch S4100-ON Series - Key Features

2
Dell EMC PowerSwitch S5200-ON Series Switches
© 2019 Dell Inc. or its subsidiaries.
Key features
• 1 or 2RU high-density ToR switches with up to 48 or 96
ports of 25GbE or 32 ports of 100GbE
• Multi-rate 100GbE ports support 10/25/40/50/100GbE
• Scalable L2 and L3 Ethernet switching with QoS and
a full complement of standards-based IPv4 and IPv6
features, including OSPF and BGP routing support
• Line-rate performance via non-blocking switch
fabrics: 3.2Tbps (6.4Tbps full-duplex) on S5296F-ON
and S5232F-ON, 2.0Tbps (4.0Tbps full-duplex) on
S5248F-ON, and 1.08Tbps (2.16Tbps full-duplex) on
S5224F-ON and S5212F-ON
• L2 multipath support via Virtual Link Trunking (VLT)
and Routed VLT support
• VXLAN gateway functionality support for bridging and
routing the non-virtualized and the virtualized overlay
networks with line rate performance (hardware only)
• Support for OS10 Enterprise Edition
• Converged network support for DCB, with priority ow
control (802.1Qbb), ETS (802.1Qaz), DCBx and iSCSI
TLV support
• Routable RoCE to enable convergence of compute
and storage on Leaf/Spine Fabric
• IO panel to PSU airow or PSU to IO panel airow
Redundant, hot-swappable power supplies and fans on
most models
• Supports the open source Open Network Install
Environment (ONIE) for zero touch installation of
alternate network operating systems
• L2 VXLAN (Static VXLAN with VLT, BGP EVPN)
• Tool-less enterprise ReadyRails
™
mounting kits for
most models reducing time and resources for switch
rack installation (S5212F-ON will utilize a tandem tray
for mounting)
• Power-efcient operation and Dell Fresh Air 2.0
compliant up to 45ºC helps reduce cooling costs in
temperature constrained deployments
Key features with Dell EMC Networking OS10
• Consistent DevOps framework across compute,
storage and networking elements
• Standard networking features, interfaces and scripting
functions for legacy network operations integration
• Standards-based switching hardware abstraction via
Switch Abstraction Interface (SAI)
• Pervasive, unrestricted developer environment via
Control Plane Services (CPS)
• OS10 Enterprise Edition software enables Dell EMC
layer 2 and 3 switching and routing protocols with
integrated IP services, quality of service, manageability
and automation features
• Leverage common open source tools and best
practices (data models, commit rollbacks*)
• Increase VM Mobility region by stretching L2 VLAN
within or across two DCs with unique VLT capabilities
• Scalable L2 and L3 Ethernet Switching with QoS, ACL
and a full complement of standards based IPv4 and
IPv6 features including OSPF, BGP and PBR
• Enhanced mirroring capabilities including local
mirroring, Remote Port Mirroring (RPM), and
Encapsulated Remote Port Mirroring (ERPM)
• Converged network support for Data Center Bridging,
with priority ow control (802.1Qbb), ETS (802.1Qaz),
DCBx and iSCSI TLV
*Roadmap
Features S5212F-ON S5224F-ON S5248F-ON S5296F-ON S5232F-ON
Ports
12xSFP28
3xQSFP28
24xSFP28
4xQSFP28
48xSFP28
2xQSFP28-DD
4xQSFP28
96xSFP28
8xQSFP28
32xQSFP28
2xSFP+
Max 10GbE density 24 40 80 128 128
Max 25GbE density 24 40 80 128 128
Max 40GbE density
3 4 8 8 32
Max 50GbE density 6 8 16 16 64
Max 100GbE
density
3 4 8 8 32
Switching capacity 1.08Tbps (2.16Tbps
full-duplex)
1.08Tbps (2.16Tbps
full-duplex)
2.0Tbps (4.0Tbps
full-duplex)
3.2Tbps (6.4Tbps
full-duplex)
3.2Tbps (6.4Tbps
full-duplex)
Throughput 892Mpps 1488Mpps 1.5Bpps 2.4Bpps 2.4Bpps