About this Guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting,
inserting optional modules, and connecting to a power source.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING: Only trained and qualified personnel can install this equipment. Read this guide before you install and power
up this equipment. Disconnect power cords before servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1, Laser Product Label
WARNING
: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the
optical transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures.
Related Publications
For more details about S3100 series software configuration, see the following publications:
• The Dell Configuration Guide for the S3100 Series describes software configuration.
• The Dell Command Line Reference Guide for the S3100 Series provides command line interface (CLI) information.
• The Dell Networking S3100 Series Release Notes provide information about upgrading the S3100 series.
NOTE: Information is available on the Dell Networking Support website (http://www.dell.com/support).
1
About this Guide 5
To Next Page
Loading...
