Dell EMC PowerSwitch S4100-ON Series - IEEE Standards

Parameter Specications
S5248F-ON: 100–240 VAC 50/60 Hz
S5296F-ON: 100–240 VAC 50/60 Hz
S5224F-ON: 100-240 VAC 50/60 Hz
S5212F-ON: 100-240 VAC 50/60 Hz
Maximum current draw per system
S5232F-ON: 5.8A@110VAC and 2.4A@220VAC
S5248F-ON: 5.8A@110VAC and 2.4A@220VAC
S5296F-ON: 8.2A@110VAC and 4.1A@220VAC
S5224F-ON: 4.2A@110VAC and 2.1A@220VAC
S5212F-ON: 2.8A@110VAC and 1.4A@220VAC
Maximum power consumption
S5232F-ON: 635W maximum
S5248F-ON: 647W maximum
S5296F-ON: 893W maximum
S5224F-ON: 455W maximum
S5212F-ON: 304W maximum
Typical power consumption
S5232F-ON: 490W typical
S5248F-ON: 420W typical
S5296F-ON: 607W typical
S5224F-ON: 280W typical
S5212F-ON: 208W typical
Table 10. DC power requirements
Parameter Specications
Minimum and maximum input voltage range –40VDC minimum
Maximum current at full load with fan
S5232F-ON: 15.9A @40VDC
S5248F-ON: 16.2A @40VDC
S5296F-ON: 22.3A @40VDC
S5224F-ON: 11.4A@40VDC
S5212F-ON: 7.6A@40VDC
IEEE standards
The S5200F-ON Series switch complies with the following IEEE standards.
• 802.1ab (LLDP)
Specications
65