Dell EMC PowerSwitch S4100-ON Series - Specifications; Chassis Physical Design

Specications
This section lists the S4100–ON Series (S4128F-ON, S4148F-ON, S4148FE-ON, S4128T-ON, S4148T-ON, and S4148U-ON) switch
specications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F—45°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
• Korean certication of compliance
• Safety standards and compliance agency certications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 16. Chassis physical design
Parameter Specications
Height 1.71 inches (43.5 mm)
Width 17.1 inches (434 mm)
Depth
18.1 inches (460 mm)
PSU/fan tray handle: 1.57 inch (40 mm)
Chassis weight with factory-installed components
S4128F-ON: 19.66 lbs/8.92 kg (2* PSUs)
S4148F-ON: 20.15 lbs/9.14 kg (2* PSUs)
S4148FE-ON: 20.15 lbs/9.14 kg (2* PSUs)
S4128T-ON: 19.66 lbs/8.92 kg (2* PSUs)
S4148T-ON: 20.15 lbs/9.14 kg (2* PSUs)
S4148U-ON: 21.63 lbs/9.81 kg (2* PSUs)
8
46 Specications