1 Fans
The S5212F-ON switch fan modules:
1 Fans
Fan LEDs
• Solid green—Fan function is normal.
• Flashing yellow—There is a fan fault.
• O—Fan is o.
Fan module installation
For all switches except the S5212F-ON, the fan modules in the S5200F-ON Series switch are eld replaceable. For the S5212F-ON switch,
the fans are xed. For the S5224F-ON, S5232F-ON, and S5248F-ON switches, fan module slots 1 and 2 are on the left side of the switch
and fan module slots 3 and 4 are on the right side of the switch. For the S5296F-ON switch, fan module slots 1 through 4 are on the left
side of the switch. For the S5212F-ON switch, the fans are across the entire switch.
CAUTION
: DO NOT mix airow directions. All fans must use the same airow direction—reverse or normal. If you mix the airow
direction, to avoid damage to the switch,
you must correct the mixed airow
.
1 Take the fan module out of the shipping box.
2 Slide the module into the bay.
The S5224F-ON, S5232F-ON, or S5248F-ON switch fan module installation:
54
Fans