– S5224F-ON—twenty-four 25GbE SFP28 ports and four 100GbE QSFP28 ports
– S5232F-ON—thirty-two 100GbE QSFP28 ports and two 10GbE SFP+ ports
– S5248F-ON—forty-eight 25GbE SFP28 ports, four 100GbE QSFP28 ports, and two 200GbE QSFP-DD ports
– S5296F-ON—ninety-six 25GbE SFP28 ports and eight 100GbE QSFP28 ports
• One MicroUSB-B console port
• One RJ45 console port
• One USB Type A port for more le storage
• Four-core Intel Denverton central processing unit (CPU) system with 16GB SDRAM and 64GB SSD
• One 10/100/1000BaseT Ethernet management port
• Temperature monitoring
• Software-readable thermal monitor
• Real time clock (RTC) support
• All switches except S5212F-ON: two hot-pluggable redundant PSUs
• All switches except S5212F-ON: four hot-pluggable replaceable fan modules
• S5212F-ON: two xed PSUs
• S5212F-ON: four xed fans modules
• Power management monitoring
• Two-hole ground lug
• S5212F-ON and S5296F-ON—USB male-female extension cable
• Switch:
– S5212F-ON—Standard one-half rack unit
– S5224F-ON—Standard one rack unit
– S5232F-ON—Standard one rack unit
– S5248F-ON—Standard one rack unit
– S5296F-ON—Standard two rack units
Physical dimensions
The S5200F-ON Series switch have the following physical dimensions:
• S5212F-ON—one-half rack unit:
– 7.87 x 16 x 1.72 inches (W x D x H)
– 199.8 x 406.4 x 43.6 mm (W x D x H)
• S5224F-ON, S5232F-ON, S5248F-ON—one rack unit:
– 17.1 x 18.1 x 1.72 inches (W x D x H)
– 434 x 460 x 43.6 mm (W x D x H)
• S5296F-ON—two rack units:
– 16.6 x 20.1 x 3.42 inches (W x D x H)
– 422 x 511 x 87 mm (W x D x H)
LED display
The S5200F-ON Series switch includes LED displays on the I/O side of the switch. This section describes open networking installation
environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.
S5200F-ON Series switch
13
To Next Page
Loading...
