4 Repeat with the other side.
5 Install the dual tray inside the four-post rack. Rackmount screws are not included.
6 Attach the front dual-tray switch rails to the four-post rack from the front. Secure the dual tray to the rack using two user-supplied
screws for each rack post.
7 Attach the rear dual-tray switch rails to the four-post rack from the rear. Secure the dual tray to the rack using two user-supplied
screws for each rack post.
8 Tighten all mounting screws to securely mount the dual tray into the four-post rack.
S5200F-ON Series switch installation
33
To Next Page
Loading...
