Dell EMC PowerSwitch S4100-ON Series - Page 196

To assign an IP address to the management interface, eth0, and verify network connectivity, use the ifconfig eth0 <ip address>
command, as shown.
ONIE:/ # ifcong eth0 10.11.53.33/16 UP
Verify the network connection with ping.
ONIE:/ # ping 10.11.8.12
PING 10.11.8.12 (10.11.8.12): 56 data bytes
64 bytes from 10.11.8.12: seq=0 ttl=62 time=1.357 ms
64 bytes from 10.11.8.12: seq=1 ttl=62 time=0.577 ms
^C
62 Management ports