Installing Printer Drivers on the Windows Computers 109
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section10.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
3
Select
Folder Options
.
4
On the
View
tab, clear the
Use simple file sharing
(Recommended)
check
box, and then click
OK
.
5
Click
Start
Control Panel
.
6
Select
Performance and Maintenance
.
7
Select
Administrative Tools
.
8
Click
Local Security Policy
.
9
Click
Local Policies
Security Options
.
10
Right-click
Network access: Sharing and security model for local
accounts
and select
Properties
.
11
Ensure
Classic - local users authenticate as themselves
is selected.
Installing the Printer Driver
NOTE: Installation is not supported on Windows XP Home Edition, Windows
Vista Home Basic, Windows Vista Home Premium, Windows Vista Home Basic
64-bit Edition, Windows Vista Home Premium 64-bit Edition, Windows 7 Starter,
Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Home Basic 64-
bit Edition, and Windows 7 Home Premium 64-bit Edition.
1
In the
Easy Setup Navigator
window, click
Software Installation
to launch
the installation software.
2
Select
Network Installation
, and then click
Next
.
3
Select the model name of your printer, and then click
Next
.
4
Select
Remote Installation
, and then click
Next
.
a
Enter the computer name, user ID, and password, and then click
Add
.
b
Click
Next
.
NOTE:
Windows Security Alert
may appear on Windows Vista,
Windows Vista 64-bit Edition, Windows Server 2008, Windows Server 2008
64-bit Edition, Windows Server 2008 R2, Windows 7, or Windows 7 64-bit
Edition. In this case, select
Unblock
(Allow access for Windows Server
2008 R2 and Windows 7), and then continue the procedure.
5
Select a printer from the printer list, and then click
Next
. If the target printer
is not displayed on the list, click
Refresh
to refresh the list or click
Add
Printer
to add a printer to the list manually. You may specify the IP address
and port name at this point.
To Next Page
Loading...
