Dell 2150cn - Page 294

292 Understanding the Printer Menus
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when
printing in the draft mode.
Values:
LineTermination
Purpose:
To add the line termination commands.
Values:
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print
job that does not specify a print mode.
Values:
Enable Enables the Hex Dump feature.
Disable
*
Does not print in the draft mode.
Enable Prints in the draft mode.
Off
*
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Black
*
Prints in the black and white mode.