Installing the palm rest
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
Step
To install the palm rest perform the post-requisites.
Next steps
1 Install the keyboard.
2 Install the power-button assembly.
3 Install the power-adapter port.
4 Install the touchpad.
5 Install the system board.
6 Install the speakers.
7 Install the right I/O-board.
8 Install the left I/O-board.
9 Install the keyboard-controller board.
10 Install the coin-cell battery.
11 Install the display assembly.
12 Install the battery.
13 Install the rear I/O-cover.
14 Install the 2230 solid-state drive. (if applicable)
15 Install the 2280 solid-state drive. (if applicable)
16 Install the base cover.
17 Follow the procedure in After working inside your computer.
59
To Next Page
Loading...
