Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing.)
Va lu e s:
K Offset If faint black colored ghosts appear, try to decrease the value.
YMC Offset If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease the value.
Adjust 2nd BTR
Purpose:
To specify the optimum voltage settings for printing for the 2nd Belt Transfer Roller (2nd BTR). To lower the
voltage, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
CAUTION: The print quality changes depending on the setting values you select for this item.
Va lu e s:
Plain Sets the reference voltage setting for the transfer roller for plain paper within the range of -5 to 10.
Plain Thick Sets the reference voltage setting for the transfer roller for thick plain paper within the range of -5 to
10.
Covers Sets the reference voltage setting for the transfer roller for cover paper within the range of -5 to 10.
Covers Thick Sets the reference voltage setting for the transfer roller for thick cover paper within the range of -5 to
10.
Coated Sets the reference voltage setting for the transfer roller for coated paper within the range of -5 to 10.
Coated Thick Sets the reference voltage setting for the transfer roller for thick coated paper within the range of -5 to
10.
Label Sets the reference voltage setting for the transfer roller for labels within the range of -5 to 10.
Envelope Sets the reference voltage setting for the transfer roller for envelopes within the range of -5 to 10.
Recycled Sets the reference voltage setting for the transfer roller for recycled paper within the range of -5 to 10.
Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE: The print quality changes depending on the setting values you select for this item.
Va lu e s:
Plain Sets the temperature settings for the fusing unit for plain paper within the range of -3 to 3.
Plain Thick Sets the temperature settings for the fusing unit for thick plain paper within the range of -3 to 3.
Covers Sets the temperature settings for the fusing unit for cover paper within the range of -3 to 3.
Covers Thick Sets the temperature settings for the fusing unit for thick cover paper within the range of -3 to 3.
Dell™ Printer Configuration Web Tool 120
To Next Page
Loading...
Need help?
General
Weight and Dimensions
