Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Panel Lock"
Panel Lock
Purpose:
To set a limited access to Admin Settings with a password, and to set or change the password.
Va lu e s:
Panel Lock Control Disable
*
Disables password protection for Admin Settings.
Enable Enables password protection for
Admin Settings.
Change Password
*1
0000–9999 Sets or changes the password required to access Admin Settings.
*1
This item is available only when Panel Lock Control is set to Enable.
Login Error
NOTE: Login Error feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin
Settings and Report/List menu.
Va lu e s:
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5
*
Sets the number of error entry attempts allowed when an administrator logs in.
Available Range: 1-10
Tray Settings
Use the Tray Settings menu to define the print media loaded in tray1 and the optional 550-sheet feeder.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
MPF
Purpose:
To specify the paper loaded in the MPF.
Va lu e s:
Paper Size
*1
Use Driver Settings
*
mm series A4
A5
B5
Letter
Understanding the Printer Menus
191
To Next Page
Loading...
