Wireless LAN
NOTE: Wireless LAN feature is available only when the printer is connected using the wireless network.
Purpose:
To configure the detailed setting for the wireless network.
To use the wireless adapter, be sure to disconnect the Ethernet cable.
NOTE: Once wireless LAN is activated, wired LAN protocol will be disabled.
Va lu e s:
Wireless Settings SSID Sets the name that identifies the wireless network. Up to 32 alphanumeric
characters can be entered.
Network Type Sets the network type from either Ad-Hoc or Infrastructure.
MAC Address Displays the MAC address of the wireless adapter for the printer.
Link Channel Displays the channel number of the wireless connection for the printer.
Link Quality Displays the quality of the wireless network connection for the printer.
Security Settings Encryption Select the encryption type from the list.
No Security Sets No Security to configure the wireless
setting without specifying an encryption type
from WEP, WPA-PSK, and WPA-Enterprise.
WEP Sets the WEP to use through the wireless
network.
WPA-PSK TKIP
*1, 2
Sets the WPA-PSK TKIP to use through the
wireless network.
WPA-PSK AES/WPA2-PSK
AES
*1, 2
Sets the WPA-PSK AES/WPA2-PSK AES to
use through the wireless network.
WPA-Enterprise
TKIP
*2, 3
Sets the WPA-Enterprise TKIP to use
through the wireless network.
WPA-Enterprise Sets the WPA-Enterprise AES/WPA2-
AES/WPA2-Enterprise
AES
*2, 3
Enterprise AES to use through the wireless
network.
Mixed Mode PSK
*1, 2
Sets the Mixed Mode PSK to use through the
wireless network. Mixed Mode PSK
automatically selects the encryption type
from either WPA-PSK TKIP, WPA-PSK AES,
or WPA2-PSK AES.
Mixed Mode
Enterprise
*2, 3
Sets the Mixed Mode Enterprise to use
through the wireless network. Mixed Mode
Enterprise automatically selects the
encryption type from either WPA-Enterprise
TKIP, WPA-Enterprise AES, or WPA2-
Enterprise AES.
WEP Encryption Select the WEP key code from either Hex or Ascii.
WEP Key 1 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 1 Enters the WEP key 1 again to confirm it.
WEP Key 2 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 2 Enters the WEP key 2 again to confirm it.
Dell™ Printer Configuration Web Tool 138
To Next Page
Loading...
Need help?
General
Weight and Dimensions
