Default Color
Purpose:
To specify the output color.
Va lu e :
Color (Auto)
*
Black
PS
Use the PS menu to change printer settings that only affect jobs using the PostScript Level3 Compatible emulation
printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the contents of the errors concerning PostScript Level3 Compatible page description language
are printed.
The change becomes effective after the printer is turned off and then on
again.
Va lu e s:
Off Discards the print job without printing an error message.
On
*
Prints an error message before it discards the job.
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-out
Purpose:
To specify the execution time for one PostScript Level3 Compatible job. The change becomes effective after the
printer is turned off and then on again.
Va lu e s:
Off
*
Job time-out does not occur.
On 1 minute
*
Available Range:
1-900 minutes.
An error concerning the PostScript Level3 Compatible page description
language occurs if processing is not completed after the specified time.
Paper Select Mode
Purpose:
To specify the way to select the tray for PostScript Level3 Compatible mode. The change becomes effective after the
printer is turned off and then on again.
Va lu e s:
Auto* The tray is selected as the same setting as in the PCL mode.
Select From Tray The tray is selected in a method compatible with regular PostScript Level3 Compatible printers.
Understanding the Printer Menus
170
To Next Page
Loading...
Need help?
General
Weight and Dimensions
