Dell C2660dn - Page 69

10 To change the printer name, enter the printer name in the Printer name box, and then click Next . To use this
printer as the default printer, select the check box displayed under the
Printer name , and then click Next .
Installation starts.
If the
User Account Control dialog box appears, click Continue .
NOTE: If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
11 As the driver installation is completed, click Print a test page to print a test page.
12 Click Finish .
Windows Server 2008 or Windows Server 2008 64-bit Edition
NOTE: You must log in as an administrator.
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS-V3_C2660.zip (where D is the drive letter of the optical drive)
2 Click Start → Control Panel → Hardware and Sound → Printers .
3 Click Add a printer .
4 Click Add a local printer .
5 Select the port connected to this product, and then click Next .
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse , and then select the extracted folder in step 1.
8 Click OK .
9 Select your printer name and click Next .
10 To change the printer name, enter the printer name in the Printer name box, and then click Next .
To use this printer as the default printer, select the
Set as the default printer check box, and then click Next .
11 If you do not share your printer, select Do not share this printer . If you share your printer, select Share this printer
so that others on your network can find and use it
.
12 Click Next .
Installation starts.
13 As the driver installation is completed, click Print a test page to print a test page.
14 Click Finish .
Windows 7, Windows 7 64-bit Edition, or Windows Server 2008 R2
1
Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS-V3_C2660.zip (where D is the drive letter of the optical drive)
2 Click Start → Devices and Printers .
3 Click Add a printer .
When you use Windows Server 2008 R2, click
Add a local or network printer as an administrator .
If the
User Account Control dialog box appears, click Yes .
NOTE: If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue the desired
action.
4 Click Add a local printer .
5 Select the port connected to this product, and then click Next .
Installing Printer Drivers on Windows
®
Computers 67