Rack and node host names
Lists the default rack and node host names for an ECS Appliance.
The default rack IDs and color names are assigned in installation order as shown in the following table.
Table 1. Rack ID
Rack ID Rack color Rack ID Rack color Rack ID Rack color
1 red 18 carmine 35 cornsilk
2 green 19 auburn 36 ochre
3 blue 20 bronze 37 lavender
4 yellow 21 apricot 38 ginger
5 magenta 22 jasmine 39 ivory
6 cyan 23 army 40 carnelian
7 azure 24 copper 41 taupe
8 violet 25 amaranth 42 navy
9 rose 26 mint 43 indigo
10 orange 27 cobalt 44 veronica
11 chartreuse 28 fern 45 citron
12 pink 29 sienna 46 sand
13 brown 30 mantis 47 russet
14 white 31 denim 48 brick
15 gray 32 aquamarine 49 avocado
16 beige 33 baby 50 bubblegum
17 silver 34 eggplant
Nodes are assigned node names based on their order within the server chassis and within the rack itself. The following table lists
the default node names.
Table 2. Default node names
Node Node name Node Node name
1 provo 9 boston
2 sandy 10 chicago
3 orem 11 houston
4 ogden 12 phoenix
5 layton 13 dallas
6 logan 14 detroit
7 lehi 15 columbus
8 murray 16 austin
Nodes that are positioned in the same slot in different racks at a site have the same node name. For example, node 4 is called
ogden, assuming that you use the default node names.
The getrackinfo command identifies nodes by a unique combination of node name and rack name. For example, node
4 in rack 1 is identified as ogden-red and can be pinged using its NAN resolvable (through mDNS) name: ogden-
red.nan.local.
12
EX-Series Hardware Overview
To Next Page
Loading...
Need help?
General
