Figure 22. EXF900 disk drive in carrier
EXF900 power cabling
Provides EXF900 ECS appliance cabling diagrams for single-phase AC power and three-phase delta and Wye AC power.
Use the power and weight calculator to refine the power and heat values to more-closely match the hardware configuration for
your system. The calculator contains the latest information for power and weight planning.
The EXF900 appliance connections to 0U PDU and 2U PDU outlets are cabled in the following configurations:
● EXF900 0U Single-Phase PDU
○ Standard
○ With aggregation switch–Rack 2 only
● EXF900 0U Three-Phase PDU
○ Standard
○ With aggregation switch–Rack 2 only
● EXF900 2U Single-Phase PDU
○ Standard
○ With aggregation switch
● EXF900 2U Three-Phase PDU
○
Standard
○ With aggregation switch
Table 13. EXF900 Standard Single-Phase 0U PDU Cabling
PDU Outlet Component Line cord per zone
37 Empty 4
36 Empty 4
35 Node 16 4
34 Node 15 4
33 Empty 4
32 Node 14 4
31 Node 13 4
32 EXF900 Platform
To Next Page
Loading...
Need help?
General
