Dell EMC XC Core XC650 User Manual

Figure 89. Removing the VGA port
3. If the VGA module is not going to be replaced, install a filler bracket and close the card retention latch.
Figure 90. Installing the filler bracket
Next steps
1. Replace the rear VGA module or install the riser blank.
Installing the rear VGA port
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove expansion card riser 3.
Steps
1. If installed, remove the filler bracket from the expansion card riser (Riser 3).
100
Installing and removing system components

Dell EMC XC Core XC650 Specifications

General

Brand	Dell
Model	EMC XC Core XC650
Category	Server
Language	English