Dell inspiron 27 7000 - Post-requisites

4 Connect the hard-drive data cable (SATA0), power cable (MB-DCPWR), power-
button board cable (0SDC1), display cable (MB-DISPC) and fan-power cable
(FAN_SYS) to their respective connectors on the system board.
Identifier GUID-68C785A0-BB0C-4F07-8EC6-F0CA8FEAAE7D
Status Released
Post-requisites
1 Replace the processor.
2 Replace the heat-sink.
3 Replace the wireless card.
4 Replace the solid-state drive.
5 Replace the memory modules.
6 Replace the system-board shield.
7 Replace the back cover.
110