17 Remove the I/O bracket.
18 Remove the I/O board.
19 Remove the system board.
Identifier GUID-56B10331-AC3C-4D2D-AF01-1AA0736B381B
Status Released
Procedure
1 Press the tabs on the display converter cable (CONVERTER) and disconnect the
cable from the display panel through its slot on the middle frame.
2 Remove the eight screws (M3x5) that secure the middle frame to display panel.
3 Gently lift the middle frame o the display panel at an angle.
4 Push the display-panel cable (EDPCN1) through the slot on the middle frame.
112
To Next Page
Loading...
