Dell inspiron 27 7000 - Removing the system-board shield; Prerequisites; Procedure

Identifier GUID-342B5CBF-63A8-4038-B670-4F7C53E1E5DE
Status Released
Removing the system-board
shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-67F8B481-ACBA-47A0-BCAF-357C6042B18E
Status Released
Prerequisites
Remove the back cover.
Identifier GUID-7A23643F-66BC-46AC-ABF5-D65B4593759E
Status Released
Procedure
1 Remove the six screws (M3x5) that secure the system-board shield to the
middle frame.
58