Dell inspiron 27 7000 - Replacing the inner frame; Procedure; Post-requisites

Identifier GUID-037F1F4F-9569-4D86-A8B5-B2ABD95EF213
Status Released
Replacing the inner frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-5BEFF9C1-5F0C-4B7E-AA87-1309243801D4
Status Released
Procedure
1 Align the I/O port covers on the inner frame with the I/O ports on the I/O board.
2 Align the screw holes on the inner frame with the screw holes on the middle
frame.
3 Snap the inner frame into place.
4 Replace the eight screws (M3x5) that secure the inner frame to the middle
frame.
Identifier GUID-824DB7F2-DD6B-4A5B-8AFB-D64D2FD9CFEF
Status Released
Post-requisites
1 Replace the stand.
2 Replace the back cover.
35