Identifier GUID-2596AFC0-F1E8-4A0E-A603-7D2CFE582ECE
Status Released
Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-7B11D1ED-F1B2-47FA-A1A0-7D0C898AEB6C
Status Released
Procedure
1 Align the screw holes on the fan with the screw holes on the middle frame.
2 Replace the three screws (M3x5) that secure the fan to the middle frame.
3 Route the fan-power cable (FAN_SYS) through the routing guides.
4 Connect the fan-power cable (FAN_SYS) to the system board.
Identifier GUID-352452C2-A4B4-43B4-9917-C72AF18BDA02
Status Released
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
63
To Next Page
Loading...
