Dell inspiron 27 7000 - Procedure

Identifier GUID-E37E55C4-1964-4ABA-952C-7B58A4FA17B1
Status Released
Procedure
NOTE: For the location of the jumper, see “System-board components”.
1 Remove the jumper plug from the password jumper pins.
2 Wait for ve seconds, and then replace the jumper plug to its original location.
Identifier GUID-352452C2-A4B4-43B4-9917-C72AF18BDA02
Status Released
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
135