Dell inspiron 27 7000 - Removing the side I;O-board; Prerequisites; Procedure

Identifier GUID-7A647C13-3614-4248-8625-5BB2EBA6CAE1
Status Released
Removing the side I/O-board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-C1B22190-D142-414D-9D17-9F1986FA860F
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
4 Follow the procedure from step 1 to step 6 in “Removing the media-card reader”.
Identifier GUID-EAE6DC54-4D55-4FC0-88EB-850BC2FF56DC
Status Released
Procedure
1 Remove two screws (M3x5) that secure the side I/O-board to the side I/O-
board bracket.
55