Dell inspiron 27 7000 - Removing the media-card reader; Prerequisites; Procedure

Identifier GUID-8463F48A-CCD9-49E5-BB12-65A95A85DBFF
Status Released
Removing the media-card reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-F35C996A-766A-42C4-AF15-BDAAFABE98EB
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
Identifier GUID-1BFAB869-4A35-42A0-8D4A-9D469D55FB9A
Status Released
Procedure
1 Disconnect the media-card reader cable (SDRDC1) from the media-card reader.
2 Disconnect the side I/O-board cable (MB-SUSBC) from the side I/O-board.
49