Dell inspiron 27 7000 - Removing the I;O board; Prerequisites; Procedure

Identifier GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6
Status Released
Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-03ED21C7-4AD2-4963-A530-1EBCCE89AEBC
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
4 Remove the I/O board bracket.
Identifier GUID-B0E1BEBE-F10D-4240-A7FD-315377D7D3B0
Status Released
Procedure
1 Press down the latch on the power-cable connector and pull the connector to
disconnect the power cable (SB-DCPWR) from the I/O board.
2 Using the pull tab, disconnect the USB Type-C cable (SB-TYPEC1) from the I/O
board.
3 Using the pull tab, disconnect the display cable (SB-DISPC) from the I/O board.
4 Disconnect the I/O-board power cable (RPWRC1) from the I/O board.
99