Identifier GUID-1FB16E7C-AF0C-4FA0-8736-EAD91D8969A8
Status Released
Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-F35C996A-766A-42C4-AF15-BDAAFABE98EB
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
Identifier GUID-28502559-4C4B-4FB6-B622-343D211BD240
Status Released
Procedure
1 Remove the two screws (M3x5) that secure the camera assembly to the front
bezel.
2 Lift the camera assembly and turn it over.
36
To Next Page
Loading...
