Dell inspiron 27 7000 - Removing the middle frame; Prerequisites

Identifier GUID-665E66D0-54D4-403E-91DA-E6669EC906EC
Status Released
Removing the middle frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-94960FC8-6C10-44FA-9A0D-1DC9BEF34BCA
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the hard drive.
4 Remove the inner frame.
5 Remove the camera.
6 Remove the microphones.
7 Remove the power-button board.
8 Remove the front bezel.
9 Remove the media-card reader.
10 Remove the side I/O-board.
11 Remove the system-board shield.
12 Remove the fan.
13 Remove the speakers.
14 Remove the subwoofer.
15 Remove the wireless card.
16 Remove the heat sink.
111