Installing camera
1 Insert the camera into the slot on the display assembly.
2 Connect the camera cable to the connector.
3 Install the:
a display panel
b display bezel
c display assembly
d WLAN card
e battery
f base cover
4 Follow the procedure in After working inside your computer.
Palm rest
Removing palm rest
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d SSD card
e memory module
f coin cell battery
g heat sink assembly
h display assembly
i chassis frame
j smart card reader
k LED board
l system board
3 The palm rest is the remaining component after removing all the components.
48
Removing and installing components