Installing display hinge
1 Place the display hinge on the display assembly.
2 Tighten the M2.5*3 screws to secure the display hinge to the display assembly.
3 Repeat step a and step b to install the other display hinge.
4 Install the:
a display bezel
b display assembly
c WLAN card
d battery
e base cover
5 Follow the procedure in After working inside your computer.
Display panel
Removing display panel
The following procedure is applicable only if your computer is a non-touch computer.
1 Follow the procedure in Before working inside your computer.
2 Remove the:
Removing and installing components
43
To Next Page
Loading...
