10. Remove the drive latch bracket from the optical drive.
Installing The Optical Drive
1. Replace the drive latch bracket on the optical drive.
2. Replace and tighten the screws to secure the drive latch bracket to the
optical drive.
3. Replace the drive latch on the optical drive.
4. Replace the screw to secure the drive latch to the optical drive.
5. Push in the left side of the optical drive door till it clicks in place in the
optical drive.
6. Push in the right side of the optical drive door.
7. Insert the optical drive into the computer.
8. Push in the eject handle on the optical drive till it clicks in place.
9. Install the
battery
.
10. Follow the procedures in
After working inside your computer
.
27
To Next Page
Loading...
