Dell Latitude E6520 - Installing the Smart Card Reader

Installing The Smart Card Reader
1. Insert the smart card reader in the computer in its original position.
2. Tighten the screws of the smart card reader.
3. Connect the smart card reader cable to the system board.
4. Install the
palm rest assembly .
5. Install the keyboard .
6. Install the keyboard trim .
7. Install the bluetooth module .
8. Install the hard drive .
9. Install the
optical drive .
10. Install the display assembly .
11. Install the base cover .
12. Install the battery .
13. Follow the procedures in After Working Inside Your Computer .
64