Dell Latitude E6520 - Installing the Wireless Switch Board

Installing The Wireless Switch Board
1. Align the wireless switch board into its original position in the computer.
2. Tighten the screw on the board.
3. Route and connect the wireless switch cable in the system board.
4. Install the
palm rest assembly .
5. Install the keyboard .
6. Install the keyboard trim .
7. Install the bluetooth .
8. Install the hard drive .
9. Install the
optical drive .
10. Install the display assembly .
11. Install the base cover .
12. Install the battery .
13. Follow the procedures in After Working Inside Your Computer .
68