Dell OptiPlex 5260 - Installing the Display Cable

b Back cover
c Hard drive
d System board shield
e WLAN card
f System fan
g Camera
h Base cover
i PSU
j PSU fan
k I/O bracket
l System board
m Speakers
n Power button board
o Microphones
p I/O board
q Headset port
r Antennas
s Display panel
3 To remove the display cable:
a To release the cable, press the tabs on both sides [1].
b Disconnect the cable, and lift it away from the display assembly base [2].
Installing the display cable
1 To install the display cable:
a Press and hold the tabs on both sides [1].
102
Removing and Installing components