Dell POWERCONNECT 5524P

Dell PowerConnect 55xx Systems User Guide 167
– European — The device switches to DST at 1:00 am on the last
Sunday in March, and reverts to standard time at 1:00 am on the last
Sunday in October. The
European option applies to EU members,
and other European countries using the EU standard.
–
Other — Specifies that you will set DST manually in the fields
described below.
If you selected
USA or European you are finished. If you selected Other ,
proceed to the next step.
There are two types of DST possible when
Others is selected. You can set a
specific date in a particular year, or you can set a recurring setting,
irrespective of the year. For a specific setting in a particular year, complete
the
Daylight Savings area, and for a recurring setting, complete the
Recurring area.
If
Other is selected, the From and To fields must be defined either in the
Non-recurring or Recurring section.
4 To enter non-recurring DST parameters, enter the following fields:
–
From — The time that DST begins. The possible options are:
•
DD/MMM/YY — The date, month, and year at which DST
begins.
•
HH/MM — The time (hour and minutes) at which DST begins.
–
To — The time that DST ends. The possible options are:
•
DD/MMM/YY — The date, month, and year at which DST ends.
•
HH/MM — The time (hour and minutes) at which DST ends.
5 To enter recurring DST parameters, select Recurring and enter the
following fields:
–
From — The time that DST begins each year, for example, DST
begins locally every second Sunday in April at 5:00 am. The possible
options are:
•
Day — The day of the week from which DST begins every year.
•
Week — The week within the month from which DST begins
every year.
•
Month — The month of the year in which DST begins every year.