Dell POWERCONNECT 5524P - Dynamic ARP Inspection List

Dell PowerConnect 55xx Systems User Guide 555
Dynamic ARP Inspection List
An ARP inspection list consists of entries where each entry is a pair of
MAC/IP addresses.
To create a new ARP inspection list and add the first entry to it:
1
Click Switching > Dynamic ARP Inspection > Dynamic ARP
Inspection List
in the tree view to display the Dynamic ARP Inspection
List: Summary
page.
Figure 18-2. Dynamic ARP Inspection List: Summary
The dynamic ARP lists are displayed.
2 To create a new list and enter the first address pair in it, click Add , and
enter the fields:
•
List Name — Create and enter a list name.
•
IP Address — Enter the IP address that will be mapped to the MAC
address entered below.
•
MAC Address — Enter the MAC address that will be mapped to the
IP address entered above.