Dell POWERCONNECT 5524P - LLDP Properties

Dell PowerConnect 55xx Systems User Guide 533
LLDP Properties
To enable and configure LLDP:
1
Click System > LLDP > LLDP Properties in the tree view to display the
LLDP Properties page.
Figure 17-1. LLDP Properties
The current LLDP properties are displayed.
2 Enter the fields:
–
Enable LLDP — Enable/disable LLDP on the device.
–
Updates Interval (5-32768) — Enter the rate at which LLDP
advertisement updates are sent.
–
Hold Multiplier (2-10) — Enter the hold time to be sent in the
LLDP update packets, as a multiple of the timer value.