Dell POWERCONNECT 5524P - Configuring an Initial Ssh Password; Configuring an Initial Http Password; Configuring an Initial Https Password

Dell PowerConnect 55xx Systems User Guide 73
Configuring an Initial SSH Password
To configure an initial SSH password, enter the following commands:
Configuring an Initial HTTP Password
To configure an initial HTTP password, enter the following commands:
Configuring an Initial HTTPS Password
To configure an initial HTTPS password, enter the following commands:
Enter the following commands once when configuring use of a terminal, a
Telnet, or an SSH session, for an HTTPS session.
NOTE: In the Web browser, enable SSL 2.0 or greater for the page content to be
displayed.
NOTE: HTTP and HTTPS services require privilege level 15 access and connect
directly to the configuration level access.
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones
console(config)# ip http authentication aaa login-
authentication local
console(config)# username admin password user1 privilege
15
console(config)# ip http authentication aaa login-
authentication local
console(config)# username admin password user1 privilege
15
console(config)# crypto certificate 1 generate key-
generate
console(config)# ip http secure-server