176 Dell PowerConnect 55xx Systems User Guide
To define the types of server from which the device accepts SNTP
information and the polling interval:
1
Click
System
>
Time Synchronization
>
SNTP Global Settings
in the
tree view to display the
SNTP Global Settings
page.
Figure 9-6. SNTP Global Settings
2
Enter the fields:
–
Poll Interval (60-86400)
— Enter the interval (in seconds) at which
the SNTP servers are polled.
–
Receive Broadcast Servers Updates
— Enable/disable receiving time
information from Broadcast servers.
–
Receive Anycast Servers Updates
— Enable/disable receiving time
information from Anycast SNTP servers.
–
Receive Unicast Servers Updates
— Enable/disable receiving time
information from the SNTP servers defined on the switch.
–
Poll Unicast Requests
— Enable/disable sending SNTP Unicast server
time information requests to the SNTP server.
To Next Page
Loading...
