Dell PowerConnect 55xx Systems User Guide 199
Remote Log Server
Log messages can be sent to remote log servers, using the SYSLOG protocol.
To add a remote log server:
1
Click
System
>
Logs
>
Remote Server Settings
in the tree view to display
the
Remote Log Server: Summary
page.
Figure 9-14. Remote Log Server: Summary
The previously-defined remote servers are displayed.
2
To add a remote log server, click
Add
, and enter the fields:
–
Supported IP Format
— Select whether the IPv4 or IPv6 format is
supported.
–
IPv6 Address Type
— When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local
— A Link Local address that is non-routable and used
for communication on the same network only.
To Next Page
Loading...
