Dell POWERCONNECT 5524P - Page 252

252 Dell PowerConnect 55xx Systems User Guide
To view the results of optical fiber tests:
•Click System > Diagnostics > Optical Transceiver Diagnostics in the
tree view to display the
Optical Transceiver Diagnostics page.
Figure 9-30. Optical Transceiver Diagnostics
The following fields are displayed for the selected unit:
–
Port — The port number on which the cable was tested.
–
Temperature — The temperature (C) at which the cable is operating.
–
Voltage — The voltage at which the cable is operating.
–
Current — The current at which the cable is operating.
–
Output Power — The rate at which output power is transmitted.
–
Input Power — The rate at which input power is transmitted.
–
Transmitter Fault — A fault occurred during transmission.
–
Loss of Signal — A signal loss occurred in the cable.
–
Data Ready — The transceiver has achieved power up, and data is
ready.