EasyManua.ls Logo

Dell POWERCONNECT 5524P - Page 295

Dell POWERCONNECT 5524P
728 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dell PowerConnect 55xx Systems User Guide 295
Network Mask
— Check and enter the pool’s network mask.
Prefix Length
— Check and enter the number of bits that
comprise the address prefix.
Address Pool Start —
Enter the first IP address in the range of the
network pool.
Address Pool End —
Enter the last IP address in the range of the
network pool.
Lease Duration
— Enter the amount of time a DHCP client can use
an IP address from this pool. The total lease duration is 4294967295
seconds, i.e. 49710.2696 days. Thus a lease of 49710 days, 0 hours, 0
minutes and 0 seconds is a legal value, while a lease of 49710 days, 23
hours, 59 minutes and 59 seconds results in an Out of Range alert.
Days
— The duration of the lease in number of days. The range is
0 to 49710 days.
Hours
— The number of hours in the lease. A days value must be
supplied before an hours value can be added.
Minutes
— The number of minutes in the lease. A days value and
an hours value must be added before a minutes value can be
added.
Infinite
— The duration of the lease is unlimited.
Default Router —
Enter the default router for the DHCP client.
Domain Name Server —
Enter the DNS server available to the DHCP
client.
Domain Name —
Enter the domain name for a DHCP client. The
domain name may contain up to 32 characters.
NetBIOS WINS Server —
Enter the NetBIOS WINS name server
available to a DHCP client.
NetBIOS Node Type —
Select how to resolve the NetBIOS name.
Valid node types are:
Empty
Default value.
Broadcast —
IP Broadcast messages are used to register and
resolve NetBIOS names to IP addresses.

Table of Contents

Related product manuals