324 Dell PowerConnect 55xx Systems User Guide
• Selection of trap generation parameters
• Access control checks
After creating a notification filter, attach it to a notification recipient in the
SNMPv1,2 Notification Recipients pages.
To add a notification filter:
1
Click
System
>
SNMP
>
Notification Filters
in the tree view to display
the
Notification Filter: Summary
page.
Figure 9-52. Notification Filter: Summary
2
The OIDs of the selected filter are displayed.
3
If required, the notification filter type can be changed by selecting one of
the following options:
–
Excluded
— OID traps or informs will not be sent.
–
Included
— OID traps or informs will be sent.
To Next Page
Loading...
