Dell POWERCONNECT 5524P - Page 366

366 Dell PowerConnect 55xx Systems User Guide
2 Click System > Stack Management > Reset in the tree view to display the
Reset page.
Figure 9-64. Reset
3 In the Reset Unit ID field, select either the unit ID to be reset or Stack to
reset all the units in the stack.
Resetting the Device Using the CLI
The following table summarizes the CLI commands for performing a reset of
the device via the CLI:
Table 9-71. Reset CLI Command
CLI Command Description
reload [slot unit]
Reloads the operating system of a single unit or of
all the units.