Dell PowerConnect 55xx Systems User Guide 377
Viewing sFlow Statistics Using the CLI
The following table summarizes the CLI commands for viewing sFlow
statistics:
The following is an example of the CLI commands:
Table 9-75. sFlow Statistics CLI Command
CLI Command Description
show sflow statistics
[port-id]
Displays sFlow statistics for ports that are
enabled for Flow sampling or Counters
sampling.
clear sflow statistics
[port-id]
Clears sFlow statistics for ports that are
enabled for Flow sampling or Counters
sampling.
console # show sflow statistics
Total sFlow datagrams sent to collectors: 100
Interface Packets Sampled Datagrams Sent to Collector
--------- ------- ------------------------------------
gi1/0/1 30 50
gi1/0/2 10 10
gi2/0/1 0 10
gi2/0/2 0 0
To Next Page
Loading...
