Dell POWERCONNECT 5524P - Page 467

Dell PowerConnect 55xx Systems User Guide 467
The following is an example of the CLI commands:
vlan {vlan-range}[name vlan-
name]
no vlan vlan-range
Creates a VLAN.
Use the no form of this command to
restore the default configuration or
delete a VLAN.
name string Adds a name to a VLAN.
dot1x auth-not-req
no dot1x auth-not-req
Enables unauthorized devices access to
the VLAN.
Use the no form of this command to
disable access to the VLAN.
console(config)# vlan database
console(config-vlan)# vlan 1972
console(config-vlan)# end
console(config)# interface vlan 1972
console(config-if)# name Marketing
console(config-vlan)# dot1x auth-not-req
console(config-if)# end
Table 14-1. VLAN Membership CLI Commands (Continued)
CLI Command Description