502 Dell PowerConnect 55xx Systems User Guide
Ports added to a LAG lose their individual port configuration. When ports are
removed from the LAG, the original port configuration is applied to the ports.
The device uses a hash function to assign packets to a LAG member. The
hash function statistically load-balances the aggregated link members. The
device considers an Aggregated Link to be a single logical port.
Aggregate ports can be linked into link-aggregation port-groups. Each group
comprises ports with the same speed, set to full-duplex operations.
Ports in a LAG can contain different media types if the ports are operating at
the same speed. Aggregated links can be manually or automatically
configured by enabling LACP on the relevant links.
To Next Page
Loading...
